home *** CD-ROM | disk | FTP | other *** search
- The doc file is huge as you've no doubt noticed. It's also
- formatted so that it can be printed to a laser or pin printer. You'll
- need to set up each printer a bit differently in order to print the
- docs correctly, so follow these directions.
-
- The document is formatted at 60 lpp, 75 cpl @ 10 cpi. At the end
- of each page is a ^L^M (Form Feed - Carriage Return) combination.
- The C/R is present since some laser printers do not reset the current
- character position after receiving a form feed character. Most laser
- printers are only capable of printing 60 lpp and since the document
- is formatted to 60 lines the skip-over-perforation option in the
- printer must be turned off. Line printers usually print 66 lpp so it
- must have it's skip-over-perforation option turned on. The left margin
- for both types of printers should be set to 5 so that there is room to
- 3-hole punch the output for placement in a binder.
-
- Two batch files are included with this archive to handle the
- details of these differences, laser.bat and line.bat.
-
-
- Laser printers:
- ---------------
- The Laser.bat file assumes the use of an HP compatible laser
- printer. Click on the icon to execute the batch file or execute it
- from the CLI directly.
-
-
- Pin printers:
- -------------
- The Line.bat file assumes the use of any Epson compatible pin
- printer. Click on the icon to execute the batch file or execute it
- from the CLI directly.
-
-
- You should get a 208 page document. If you have any problems with
- this please let me know.
-
-
- Jack Radigan
-
-